Airflow Analyst > 操作ガイド Operation Guide > 可視化プロジェクト Visualization project
『可視化プロジェクト』では、 風況シミュレーションなどの格子モデルを、様々な可視化手法(レンダラー)によって3Dシーン上に可視化します。 時系列データのアニメーション表示も可能です。
In the "visualization project", grid models such as computational grids of the wind simulation can be visualized on the 3D scene by using various visualization methods. It can also display animations created from time series data.
以下の手順で、可視化プロジェクトを準備します。
Prepare a visualization project by the following procedure.
データソースとなるNetCDFファイルを選択して、可視化プロジェクトを新規作成します。
Select a netCDF file as a data source, and create a new visualization project.
可視化プロジェクトファイル(.afv)を選択し、可視化プロジェクトを再開します。
Select a visualization project file (.afv) to resume a visualization project.
現在の可視化設定を可視化プロジェクトファイル(.afv)に保存します。
Save the current visualization settings in a visualization project file (.afv).
現在の可視化設定を別の可視化プロジェクトファイル(.afv)に保存します。
Save the current visualization settings in a separate Visualization project file (.afv).
可視化プロジェクトのプロパティダイアログボックスを表示します。
Open the Visualization Project Property dialog box.
可視化プロジェクトを終了します。
Finish the visualization project.
[可視化プロジェクト > プロパティ]をクリックすると、 可視化プロジェクトのプロパティダイアログボックスが表示されます。
Click [Visualization Project > Properties] to display the Visualization Project Property dialog box.
可視化に使用するNetCDFファイルと、読み込むデータの構造を設定します。
Specify a netCDF file and the structure of the data for visualization.
現在参照しているNetCDFファイルです。 [...]をクリックすると、別のNetCDFファイルを選択できます。
This is the netCDF file currently referenced. Click [...] to select another netCDF file.
あるケースの可視化設定を、別のケースの可視化に適用したい場合は、 この欄に別のファイルを指定し直せば、同じ可視化設定が継承されます。 (ただし、NetCDFのディメンションやフィールド、格子数が同一である必要があります。)
If you want to apply the visualization settings of one case to another, set another file in this column. The same visualization settings will be inherited. (However, dimensions, fields, and grid size of netCDF must be the same.)
格子のI軸(主流方向)に相当するディメンションを設定します。(必須)
Select the dimension corresponding to the I axis (main direction) of the grid. (Required)
格子のJ軸(直交方向)に相当するディメンションを設定します。(必須)
Select the dimension corresponding to the J axis (orthogonal direction) of the grid. (Required)
格子のK軸(鉛直方向)に相当するディメンションを設定します。(オプション)
Select the dimension corresponding to the K axis (vertical direction) of the grid. (Optional)
時間軸(フレーム)に相当するディメンションを設定します。(オプション)
Select the dimension corresponding to the time axis (frame). (Optional)
格子点の座標や時間を示す変数を選択します。
[X][Y]の変数だけ指定された場合は、二次元の格子になります。
[X][Y][Z]の変数が指定された場合は、三次元の格子になります。
複数フレームの可視化アニメーションを表示するには、[時間]の変数も指定します。
Select the variables indicating grid coordinates or the time.
When only the [X][Y] variables are specified, it will be a 2D grid.
When the [X][Y][Z] variables are specified, it will be a 3D grid.
To display a multi-frame visualization animation, also specify the [Time] variable.
X座標を示すフィールドを設定します。(必須)
経緯度座標の場合は、経度フィールドを設定します。
Select a field indicating the X coordinate. (Required)
For geographic coordinates, set a longitude field.
Y座標を示すフィールドを設定します。(必須)
経緯度座標の場合は、緯度フィールドを設定します。
Select a field indicating the Y coordinate. (Required)
For geographic coordinates, set a latitude field
Z座標(メートル単位の高度)を示すフィールドを設定します。(オプション)
Select a field indicating the Z coordinate (altitude in meters). (Optional)
時間を示すフィールドを設定します。(オプション)
Select a field indicating the time. (Optional)
風速成分を示す変数を指定します。 各種レンダラーのデフォルト設定になります。
Select the variables indicating wind components. They become the default setting of renderers.
風速成分U (I方向)を示すフィールドを設定します。(オプション)
Select a field indicating the wind component U (I direction). (Optional)
風速成分V (J方向)を示すフィールドを設定します。(オプション)
Select a field indicating the wind component V (J direction). (Optional)
風速成分W (K方向)を示すフィールドを設定します。(オプション)
Select a field indicating the wind component W (K direction). (Optional)
各種レンダラーのデフォルト設定になります。
It becomes the default setting of various renderers.
格子マスクを示すフィールドを指定します。(オプション)
Select a field indicating the grid mask. (Optional)
読み込んだデータに適用する各種パラメーターを設定します。
Set various parameters to be applied to the loaded data.
格子点座標の空間参照系をPROJ.4形式で入力します。
デフォルトの"+init=epsg:4326"は、WGS84の経緯度座標であることを表しています。
Enter a spatial reference system of the grid point coordinates in PROJ.4 format.
The default "+init=epsg:4326" represents the geographic coordinates of WGS84.
クリックして、[空間参照コード]に設定する空間参照系を選択します。
Click to select a spatial reference system to set [Spatial Reference].
主流(風速成分U)の風向を指定してください。
Set the direction from which the main flow (wind component U) is blowing.
Airflow Analystで作成したシミュレーションデータは、内部に保持する流入口の方位値を参照します。 [流入口の方位]の値を適用したい場合は、このチェックボックスをオンにします。
The simulation data created by Airflow Analyst refers to the direction value inside it.
Select this check box if you want to apply the value of [Inflow Direction].
アニメーション再生する際の目標フレームレート(フレーム/秒)を入力します。
Enter the target frame rate to play animation. (frames / second)
無風とみなされる風速の閾値を入力します。
Enter the wind speed threshold regarded as calm.
可視化したレンダラーをシェープファイル等に出力する際、各フレームに時間情報が設定されます。 その基準となる最初の日時を指定します。
When exporting the visualized renderer to the shapefile etc., time information is set for each frame. Enter the first date and time that will be the basis.
オンの場合、各レンダラーでフィールド(値)に設定された変数の単位によって、値を変換します。 (Kの場合は℃に、Paの場合はhPaに)。
If it is selected, converts values of the field in each renderer according to the unit of the variable. (K to deg C, Pa to hPa)
オンの場合、レンダラーが非表示のときには可視化計算やフィールド値の計算が行われません。
コンピュータの負荷や計算時間を軽減できますが、レンダラー設定画面のフィールド値の情報は取得できません。
オフの場合、レンダラーが非表示中でもそれらの計算が行われます。
If it is selected, visualization calculations and field values are not calculated when the renderer is hidden.
Instead of reducing computer load and computation time, you can not obtain field value information on the renderer settings.
If it is cleared, those calculations are done even while the renderer is hidden.
気象GPVデータなどの、NetCDF形式の気象モデルデータを可視化する方法は、 Airflow Analystのシミュレーションデータの可視化とほぼ同じです。 ただし、NetCDFファイルの読み込み設定を編集する必要があります。
The way to visualize weather model data of netCDF format, such as weather GPV data, is almost the same as visualization of the simulation data created by Airflow Analyst. However, you need to edit loading settings for the netCDF file.
[I] "lon", [J] "lat", [K] "p", [Time] "time"
[X] "lon", [Y] "lat", [Z] "z", [Time] "time"
[U] "u", [V] "v", [W] "w"
[Mask] n/a
気象モデルの格子は、水平方向の広さに対して高さ方向が非常に薄いため、 立体的に表示することが困難です。 高さ方向を延伸表示したい場合は、ArcSceneの[シーンのプロパティ > 高さ強調]で調整してください。
The grid of the weather model is extremely thin in the vertical direction against the horizontal extent, so it is difficult to be displayed as 3D. To exaggerate the vertical display, adjust the value of ArcScene's [Scene Properties > Vertical Exaggeration].