Airflow Analyst > 操作ガイド Operation Guide > 可視化プロジェクト Visualization project
付帯情報を画面に表示したり、指定位置の格子データをテーブルやグラフに表示します。
Displays additional information on the screen, and displays grid data at specified position on a table or chart.
可視化ツールバーの[表示 > 格子軸表示設定]をクリックすると、 格子軸表示設定ダイアログボックスが表示されます。
Click [View > Grid Axis Settings] on the Visualization toolbar to display the Grid Axis Settings dialog box.
このチェックボックスをオンにすると、3Dシーンに座標軸が描画されます。
Select this check box to draw the grid axes on the 3D scene.
可視化ツールバーの[表示 > キャプション表示設定]をクリックすると、 キャプション表示設定ダイアログボックスが表示されます。
Click [View > Caption Settings] on the Visualization toolbar to display the Caption Settings dialog box.
このチェックボックスをオンにすると、3Dシーンにフレーム番号とフレーム総数が表示されます。
Select this check box to draw the frame number and the total number of frames on the 3D scene.
このチェックボックスをオンにすると、3Dシーンに計算ステップ数が表示されます。
Select this check box to draw the computation step number on the 3D scene.
このチェックボックスをオンにすると、可視化プロジェクトのプロパティダイアログボックスの[時間]に 指定されたフィールドの時間情報が3Dシーンに表示されます。
Select this check box to draw the information specified by [Time] field in the Visualization Project Properties dialog box.
日付と時間が表示されます。
The date and time are drawn.
経過時間が表示されます。
The elapsed time is drawn.
ソルバーの計算で無次元化された時間が表示されます。
Non-dimensional time by the solver is drawn.
このチェックボックスをオンにすると、[日時]表示の際にタイムゾーンオフセット(+09:00)も表示されます。
Select this check box to show the time zone offset when [Date Time] is selected.
可視化ツールバーの[表示 > 格子点情報]をクリックすると、 格子点位置情報ダイアログボックスが表示されます。
Click [View > Grid Point Information] on the Visualization toolbar to display the Grid Point Position dialog box.
I、J、Kのインデックス値で指定された格子点が3Dシーン上に表示されます。
Set the index value of I, J, K of the grid point to display it on the 3D scene.
このチェックボックスをオンにすると、その軸の格子点が全部表示されます。
Select this check box to display all grid points on that axis.
[位置]タブで[全て]を 選択した場合に表示される軸の格子点のサイズと色を選択します。
Edit the size and color of the grid points on the axis displayed when [all] on the [Position] tab is selected.
[位置]タブで指定された格子点のサイズと色を選択します。
Edit the size and color of the grid point specified on the [Position] tab.
クリックすると、指定された格子点におけるフィールド値の一覧テーブルが表示されます。 [フレーム]を変更すると、そのフレームにおけるフィールド値が表示されます。
Click to display a list of the field values of the specified grid point. When you change [Frame], the field values in that frame are displayed.
クリックすると、指定された格子点におけるフィールド値グラフ(時系列)ダイアログボックスが表示されます。
Click to display the Field Value Chart (Time Series) dialog box of the specified grid point.
何も描画されていない空間をクリックしても選択されません。 俯角が浅い場合は、最寄り格子点を正しく選択できません。
When you click on the empty space, nothing will be selected. If the depression angle is shallow, the nearest grid point may not be selected correctly.
指定した格子点のフィールド値を時系列でグラフとテーブルに表示します。
The field values of the specified grid point are displayed in a chart and table in chronological order.
可視化ツールバーの[表示 > フィールド値グラフ(時系列)]をクリックすると、 フィールド値グラフ(時系列)ダイアログボックスが表示されます。
On the Visualization toolbar, click [View > Field Value Chart (Time Series)] to display the Field Value Chart (Time Series) dialog box.
横軸はフレーム番号、縦軸はフィールド値です。
The horizontal axis is the frame number, and the vertical axis is the field value.
フレーム番号とフィールド値のテーブルです。
行をクリックまたはドラッグして選択すると、グラフ上に該当する点がプロットされます。
テーブル上で右クリックすると、行の選択が解除されます。
行が選択された状態でCtrl+Cを押下すると、内容がクリップボードにコピーされます。
It is a table of frame number and field value.
Click or drag on lines to select them, the corresponding points are plotted on the graph.
Right click on the table to clear the selection.
If you press Ctrl+C while lines are selected, the contents are copied to the clipboard.
クリックすると、表示中のグラフをPNG形式の画像で出力したり、テーブルをCSV形式で出力できます。
Click to output the displayed chart as PNG image or output the table in CSV format.
格子点をI、J、Kのインデックス値で選択します。
Select a grid point with the index value of I, J, K.
値を取得する変数を選択します。
Select a variable to get values.
このチェックボックスをオンにすると、グラフに描画されるフィールド値やフレームの範囲を、自動的に最小値~最大値に設定します。
If this check box is selected, the range of field value and frame on the chart are automatically set to the minimum and the maximum value.
表示されるフィールド値の小数点以下の桁数を設定します。
Set the number of digits after the decimal point of the displayed field value.
フィールド値を指数で表示します。
Display field value as an exponent.
指定した格子点位置におけるフィールド値の鉛直分布をグラフとテーブルに表示します。
The vertical field values of the specified grid point position are displayed in the graph and table.
可視化ツールバーの[表示 > フィールド値グラフ(鉛直)]をクリックすると、 フィールド値グラフ(鉛直)ダイアログボックスが表示されます。
On the Visualization toolbar, click [View > Field Value Chart (Profile)] to display the Field Value Chart (Profile) dialog box.
横軸はフィールド値、縦軸は高さです。
The horizontal axis is the field value, and the vertical axis is the height.
高さとフィールド値のテーブルです。
行をクリックまたはドラッグして選択すると、グラフ上に該当する点がプロットされます。
テーブル上で右クリックすると、行の選択が解除されます。
行が選択された状態でCtrl+Cを押下すると、内容がクリップボードにコピーされます。
ヘッダーの"K"をクリックすると、高さの昇順と降順が切り替わります。
It is a table of field value and height.
Click or drag on lines to select them, the corresponding points are plotted on the graph.
Right click on the table to clear the selection.
If you press Ctrl+C while lines are selected, the contents are copied to the clipboard.
Click "K" in the header to switch to ascending or descending order of height.
クリックすると、グラフをPNG形式の画像で出力したり、テーブルをCSV形式で出力できます。
Click to output the displayed chart as PNG image or output the table in CSV format.
値を取得する変数を選択します。
Select a variable to get values.
格子点の水平位置をI、Jのインデックス値で選択します。
Set the horizontal position of the grid point with the index value of I and J.
フレーム番号を指定します。
Enter the frame number.
このチェックボックスをオンにすると、グラフに描画されるフィールド値の範囲を、自動的に最小値~最大値に設定します。
If this check box is selected, the range of field value on the chart are automatically set to the minimum and the maximum value.
表示されるフィールド値の小数点以下の桁数を設定します。
Set the number of digits after the decimal point of the displayed field value.
フィールド値を指数で表示します。
Display field value as an exponent.
グラフの縦軸を、格子の最下層からの高さにします。
Set the vertical axis of the chart to be the height from the bottom layer of the grid.
グラフの縦軸を、各格子点のZ座標にします。
Set the vertical axis of the chart to be the Z coordinate of each grid point.
各レンダラーで描画された部分をクリックして、その地点の値を確認できます。
You can check the value at the point by clicking on the part drawn by each renderer.