Airflow Analyst > 操作ガイド Operation Guide > 解析プロジェクト Analysis Project
以下の手順で、計算格子に関する各種条件を設定します。
Specify various conditions for the computational grid as follows.
ソルバー実行時に、任意の格子点における時系列データを出力するための設定です。
ソルバー設定の[記録間隔]に係わらず、全ステップの計算値を取得できます。
格子点ごとに"hist01.dat"のような名前のファイルが作成され、
無次元の経過時間、U、V、W値がテキスト形式で出力されます。
These are the settings for outputting time series data at any grid point from the solver.
Regardless of [Recording Interval] of the solver settings, you can get calculated values of all steps.
A file with a name like "hist01.dat" is created for each grid point,
and then non-dimensional elapsed time, U, V, and W values are output in text format.
解析ツールバーの[格子 > 格子点時系列データ]をクリックすると、
時系列データ出力格子点ダイアログボックスが表示されます。
レイヤー指定と格子インデックス指定により、合計25地点まで登録できます。
地点数が上限を超える場合は、レイヤー指定が先に登録されます。
出力地点の数に係わらず、ファイルは25個全て作成されますが、これは仕様です。
On the Analysis toolbar, click [Grid > Grid Point Time Series Data]
to display the Grid Points to Output Time Series Data dialog box.
Up to a total of 25 points can be registered by specifying a layer and grid indices.
If the number of grid points exceeds the upper limit, grid points by layer will be registered first.
Regardless of how much points you want to output, all 25 files will be created. This is by design.
ここで選択したレイヤーに含まれるフィーチャーの最寄格子点が登録されます。
Select the layer including features to register grid points nearby them.
地点名を示すフィールドを指定します。出力ファイル名に地点名が付与されます。
Select the field including the position names. The name will be added to each output file name.
選択したレイヤーが2Dの場合は、点のZ座標(高さ)を示すフィールドを指定してください。
If the selected layer is 2D, select the field including the Z coordinates (height) of the points.
フィールド(Z)が絶対高度を示すのか、地上高を示すのかを選択します。
Select whether [Field (Z)] includes altitudes or ground heights.
時系列データを出力する格子点のインデックス番号を0始まりで入力します。
(注)ソルバー用の解析設定ファイル"para4.dat"には、番号が1始まりで記載されます。
Enter the index number (starting from 0) of the grid points to output the time series data.
(Note) In the analysis parameter file "para4.dat" for the solver, the numbers will be listed starting from 1.
地点名を設定すると、出力されるファイル名に地点名が付与されます。
If you enter the position name, it is added to the output file name.
時系列データ出力格子点を3Dシーン上に表示する際の色やサイズなどを指定します。
Specify the color and size to display the grid points on the 3D scene.
このチェックボックスをオンにすると、3Dシーン上に時系列データ出力格子点が描画されます。
When this check box is selected, the grid points will be drawn on the 3D scene.
指定した格子点に、個別に物体種別コード(フラグ)を設定できます。
解析ツールバーの[格子 > 追加フラグ格子点]をクリックすると、
追加フラグ格子点ダイアログボックスが表示されます。
You can put the object type codes (flags) individually on the specified grid points.
On the Analysis toolbar, click [Grid > Extra Flag Grid Point]
to display the Extra Flag Grid Point dialog box.
格子点のインデックス番号を入力します。
Enter the index number of each grid point.
物体種別コードを数値で入力します。(障害物の場合は1)
Enter the object type code as a numerical value. (1 for obstacle)
このチェックボックスをオンにすると、3Dシーン上に追加フラグ格子点が描画されます。
When this check box is selected, the grid points will be drawn on the 3D scene.
クリックすると、テーブルのすべての行を削除します。
Click to delete all rows in the table.
風洞実験では、建物が立ち並ぶ市街地の乱れた流入風を模擬するため、
モデルの手前の床面にラフネス・ブロックと呼ばれる物体を配置することがあります。
Airflow Analystにおいても、ソルバー実行時に乱流を発生させて流入変動風を生成するため、
障害物となる格子点を指定することでラフネス・ブロックを配置できます。
In a wind tunnel experiment, objects called roughness blocks may be placed on the floor in front of the model
to simulate turbulent inflow wind in an urban area with buildings.
As for Airflow Analyst, in order to generate turbulence and inflow fluctuating wind during solver execution,
you can place roughness blocks by specifying grid points that are obstacles.
解析ツールバーの[格子 > ラフネス・ブロック]をクリックすると、 ラフネス・ブロック設定ダイアログボックスが表示されます。
On the Analysis toolbar, click [Grid > Roughness Block] to display the Roughness Block Settings dialog box.
ラフネス・ブロックの格子点数を指定します。
Enter the number of grid points for a roughness block.
ブロックを配置する間隔を指定します。
Enter the interval to place blocks.
格子内でブロックを配置する範囲を指定します。
Specify the range to place blocks in the grid.
このチェックボックスをオンにすると、格子のサイズや[まで]に係わらず、範囲を最後の点までとします。
When this check box is selected, the range will be up to the last point regardless of the grid size or [To].
ラフネス・ブロックの物体種別コードを指定します。 (選択肢は「1:障害物」のみです。)
Select the object type code of the roughness block. (The choice is "1:Obstacle" only.)
編集中の既存のラフネス・ブロック設定を削除します。
Delete the existing roughness block setting in editing.
作成中の新規ラフネス・ブロック設定を追加します。
Add a new roughness block setting in creating.
編集中の既存のラフネス・ブロック設定を複製します。
Copy the existing roughness block setting in editing.
テーブルの行をクリックして選択すると、左欄でそのラフネス・ブロックを編集できます。
新しいラフネス・ブロックを追加する場合は、*印の行を選択して編集し、[追加]をクリックしてください。
既存のラフネス・ブロックを削除する場合は、行を選択してDeleteキーを押下するか、[削除]をクリックしてください。
Click a row in the table to select it, and edit its roughness block settings on the left side.
To add a new roughness block, select the row marked * and edit it, then click [Add].
To delete an existing roughness block, select the row and press the Delete key or click [Delete].
このチェックボックスをオンにすると、3Dシーン上にラフネス・ブロック格子点が描画されます。
When this check box is selected, the grid points of the roughness blocks will be drawn on the 3D scene.
解析ツールバーの[格子 > エクスポート > 格子線シェープファイル]をクリックすると、 表示中の格子線をポリライン・シェープファイルとして出力できます。
On the Analysis toolbar, click [Grid > Export > Grid Line Shapefile] to export displayed grid lines to a polyline shapefile.